|
Orthopaedic Implants - Plates
|
| We are Pakistan's most
reputed manufacturer and exporters of Bone Plates Orthopedic and other
Orthopedic Implants & Orthopaedic Instruments, etc. |
|
B-1701
|
MINI STRAIGHT PLATES FOR 2MM
SCREWS
|
| Thickness:
0.9mm |
Width: 5mm |
|
Hole Spacing: 6mm |
|
B-1702
|
DCP Plates - 2.0mm
|
| Thickness (4
to 6 Holes): 1mm |
Width: 5mm |
|
(7 & 8 Holes): 1.5mm |
Hole
Spacing: 5mm |
|
|
B-1703 Left & B-1704 Right
|
MINI L PLATE FOR 2MM SCREWS
|
|
Shaft with two holes & head with two holes. |
| Thickness:
1mm |
Width: 5mm |
|
Hole Spacing: 6mm |
|
B-1705
|
MINI T PLATE FOR 2MM SCREWS
|
|
Shaft with two holes & head with two holes. |
| Thickness:
1mm |
Width: 5mm |
| Hole
Spacing: 6mm |
|
|
|
B-1706
|
QUARTER TUBULAR PLATE FOR 2.7mm
SCREWS
|
| Thickness:
1mm |
Width: 7mm |
|
Hole Spacing: 8mm |
|
B-1707
|
DCP PLATES - 2.7MM
|
| Thickness (upto
6 Holes): 2mm |
Width: 8mm |
|
(7 & 12 Holes): 2.5mm |
Hole
Spacing: 8mm & 12mm |
|
|
B-1708 Left & B-1709 Right
|
L PLATES FOR 2.7MM SCREWS
|
|
Shaft with two holes & head with two holes. |
| Thickness:
1.2mm |
Width: 7mm |
|
Hole Spacing: 8mm |
|
B-1710
|
T-PLATES FOR 2.7MM SCREWS
|
|
Shaft with three holes & head with two holes. |
| Thickness:
1.2mm |
Width: 7mm |
| Hole
Spacing: 8mm |
|
|
|
B-1711
|
ST. RECONSTRUCTION PLATE FOR
2.7mm SCREWS
|
| Thickness:
3.1mm |
Width: 8mm |
|
Hole Spacing: 8mm |
|
B-1712
|
CALCANEAL PLATE FOR3.5MM SCREWS
|
|
For Calcaneus Franctures. Fixation with 3.5mm and 4mm screws. |
| Thickness:
1.2mm |
Length: 60mm
& 70mm |
|
|
B-1713 & B-1714
|
ONE THIRD TUBULAR PLATES
|
|
Used as buttress plate for fibula, metatarsals and metarcarpals.
Fixation with 3.5 & 4mm screws. Compression effect can be achieved
by eccentric insertion of remote screws. |
| Thickness:
1mm |
Width: 9mm |
|
Hole Spacing: 12mm & 16mm (One-third tube 12mm dia.) |
|
B-1715
|
ONE-THIRD TUBULAR PLATE WITH
COLLAR
|
|
Used as buttress plate for fibula, metatarsals and metarcarpals.
Fixation with 3.5 & 4mm screws. Compression effect can be achieved
by eccentric insertion of remote screws. |
| Thickness:
1mm |
Width: 9mm |
|
Hole Spacing: 12mm & 16mm (One-third tube 12mm dia.) |
|
|
B-1716
|
DCP PLATES - 3.5MM |
| Thickness:
3.5mm |
Width: 10mm |
|
Hole Spacing: 12mm & 16mm |
|
B-1717
|
SEMI TUBULAR PLATE FOR 3.5MM
SCREWS
|
| Thickness:
1mm |
Width: 11mm |
|
Hole Spacing: 16mm & 26mm |
|
|
B-1718
|
SMALL T-PLATES, RIGHT ANGLED
|
|
For the Left and Right Radius. Fixation with 3.5mm & 4mm screws. |
| Thickness:
1.2mm |
Width: 10mm |
|
Head with three holes. |
|
B-1719
|
SMALL T-PLATES, OBLIQUE ANGLED
|
|
For the Left and Right Radius. Fixation with 3.5mm & 4mm screws. |
| Thickness:
1.5mm |
Width: 10mm |
|
Head with three holes. |
|
|
B-1720
|
3.5MM STRAIGHT PELVIC
RECONSTRUCTION PLATES
|
|
Do not bend more than 15° |
| Thickness:
2.8mm |
Width: 10mm |
|
Hole Spacing: 12mm |
|
B-1721 to B-1723
|
Y-RECONSTRUCTION PLATES
|
Cat. No.
B-1721
B-1722
B-1723 |
Size
Small
Medium
Large |
No. of
Holes
6 Holes
9 Holes
12 Holes |
|
|
B-1724
|
CLOVERLEAF PLATES
|
|
For distal Intra-Articular tibial Fractures. Fixation with 3.5mm &
4.0mm Screws. |
| Thickness:
2mm |
Width:
15.2mm |
|
Cloverleaf Thickness: 12mm |
|
B-1725 & B-1726
|
LC-DCP PLATE FOR 3.5MM SCREWS
|
|
For Ulna & Radius. Fixation with 3.5mm & 4mm screws. |
| Thickness:
4mm |
Width: 11mm |
|
Hole Spacing: 13mm |
|
|
B-1727 to B-1732
|
HOOK PLATE FOR 3.5MM SCREWS
|
|
Cat. No.
B-1727
B-1728
B-1729
|
No. of Holes
4 Holes
5 Holes
6 Holes
|
Cat. No.
B-1730
B-1731
B-1732
|
No. of Holes
7 Holes
8 Holes
10 Holes
|
|
B-1733
|
4.5 MM STRAIGHT RECONSTRUCTION
PLATES
|
|
Do Not Bend more than 15°. Fixation with 4.5 & 6.5mm screws. |
| Thickness:
2.8mm |
Width: 12mm |
|
Hole Spacing:16mm |
|
|
B-1734 & B-1735
|
LIMITED CONTACT DYNAMIC
COMPRESSION PLATE (LC-DCP) FOR 4.5MM SCREWS (NARROW)
|
|
Fixation with 4.5 & 6.5mm screws. Undercuts: For reduced vascular
damage. The end holes can be used for cancellous bone screws. The
LC-DCP holes allow compression in both directions of the
longitudinal axis. Indication: As a neutralisation and tension band
plate on the tibia (not intended for the femur). |
| Thickness:
4.6mm |
Width:
13.5mm |
|
Hole Spacing: 18mm |
|
B-1736
|
LIMITED CONTACT DYNAMIC
COMPRESSION PLATE
(LC-DCP) FOR 4.5MM SCREWS (BROAD)
|
|
Fixation with 4.5 & 6.5mm screws. Undercuts: For reduced vascular
damage. The end holes can be used for cancellous bone screws. The
LC-DCP holes allow compression in both directions of the
longitudinal axis. Indication: As a tension band plate on the Femur
and for Humeral Pseudarthrosis (not intended for the Tibia). |
| Thickness:
6mm |
Width:
17.5mm |
|
Hole Spacing: 18mm |
|
|
B-1737
|
LENGTHENING PLATE, 4.5MM,
NARROW, 8 HOLES
|
| Thickness:
3.6mm |
Width: 12mm |
|
Hole Spacing: 12mm |
|
B-1738
|
LENGTHENING PLATE, 4.5MM, BROAD,
8 HOLES
|
| Thickness:
4.5mm |
Width: 16mm |
|
Hole Spacing: 12mm |
|
|
B-1739
|
LENGTHENING PLATE, 4.5MM, BROAD,
10 HOLES
|
| Thickness:
4.5mm |
Width: 16mm |
|
Hole Spacing: 12mm |
|
B-1740
|
SPOON PLATE
|
|
Shaft with V-profile for the fixation on the frontal edge of the
tibia. Fixation with 4.5mm cortical screws. |
| Thickness:
3mm |
Head Width:
33mm |
|
|
B-1741
|
4.5MM SEMI-TUBULAR PLATES, HEAVY
DUTY
|
|
Fixation with 4.5 & 6.5mm screws. A compression effect can be
achieved by eccentric positioning of the screws remote from the
fracture line. |
| Thickness:
1mm |
Width: 11mm |
|
Hole Spacing: 16mm & 26mm |
|
B-1742
|
4.5MM NARROW DCP PLATES
|
|
Fixation with 4.5 & 6.5mm screws. All holes are designed as
self-compressing holes. All the end holes are designed for
cancellous bone screws. Indication: As a neutralisation and tension
band plate on the tibia (not intended for the femur). |
| Thickness:
3.6mm |
Width: 12mm |
|
Hole Spacing: 16 & 25mm |
|
|
B-1743
|
4.5MM BROAD DCP PLATES
|
|
Fixation with 4.5 & 6.5mm screws. All holes are designed as
self-compressing holes. All the end holes are designed for
cancellous bone screws. Indication: As a tension band plate on the
femur and for humeral pseudoarthrosis (not intended for the tibia).
Use broad plates with six or seven holes in exceptional cases only,
e.g. on the humerus. |
| Thickness:
4.5mm |
Width: 16mm |
|
Hole Spacing: 16mm & 25mm |
|
B-1744
|
T-PLATE FOR 4.5MM SCREWS
|
|
Shaft with round profile, for humeral and tibial head. Fixation with
4.5 & 6.5mm screws. |
| Thickness:
2mm |
Width: 17mm |
|
|
B-1745
|
T-BUTTRESS PLATE FOR 4.5MM SCREWS |
With double bend, as buttress for tibial head fractures.
Fixation with 4.5mm & 6.5mm screws. |
| Thickness:
2mm |
Width: 17mm |
|
B-1746
|
L-BUTTRESS PLATE 4.5mm FOR RIGHT & LEFT LEG |
With double bend, as buttress for tibial and humeral head fractures.
Left angled for right leg & right angled for left leg. |
| Thickness:
2mm |
Width: 16mm |
|
|
B-1747
|
95º CONDYLAR PLATES (DCP)
|
|
With DCP dynamic compression holes and slot for tension device. All
condylar plates have an angle of 95° between blade and shaft. The
two holes next to the blade are suitable for 6.5mm cancellous bone
screws, all other holes are self-compressing holes. Fixation with
4.5mm cortical screws. For fractures in the distal and proximal
femoral region as well as for intertrochanteric valgus osteotomy. |
|
Thickness: 5.6mm |
Width: 16mm |
| Hole
Spacing: 16mm |
U-profile
Blade: 6.5x16mm |
| Shaft
Length: 5 Holes = 92mm |
7 Holes =
124mm |
|
9 Holes = 156mm |
12 Holes =
204mm |
|
14 Holes = 236mm |
16 Holes =
268mm |
|
18 Holes = 300mm |
|
|
B-1748
|
130º ANGLED BLADE PLATES (DCP)
|
|
With DCP dynamic compression holes and slot for tension device (from
6 holes up). These plates have an angle of 130° between blade and
shaft. Fixation with 4.5mm cortical screws. For femoral neck and
pertrochanteric fractures. |
| Thickness:
5.6mm |
Width: 16mm |
| Hole
Spacing: 16mm |
U-profile
Blade: 6.5x16mm |
|
Shaft Length:4 Holes = 60mm |
6 Holes =
104mm |
|
9 Holes = 152mm |
12 Holes =
200mm |
|
|
B-1749
|
CONDYLAR BUTTRESS PLATES
4.5mm FOR LEFT & RIGHT LEG
|
With DCP dynamic compression holes and slot for tension device.
As buttress for the femoral condyles with multiple fragment
fractures. |
| Thickness:
5mm |
Width: 16mm |
|
Hole Spacing: 16mm |
|
B-1750
|
LATERAL TIBIAL HEAD BUTTRESS
PLATE
4.5 FOR LEFT & RIGHT LEG
|
Fixation with 4.5mm & 6.5mm screws shaft with DCP dynamic
compression holes and slot for tension device. Left angled for right
leg and right angled for left leg. |
| Thickness:
3.8mm |
Width: 14mm |
|
Hole Spacing: 16mm |
|
|
B-1751
|
DHS BARREL DOUBLE ANGLED PLATES
DCP HOLE - 120°
|
With DCP dynamic compression holes and slot for tension device.
Fixation with 4.5mm Cortical Screws. |
| Thickness:
5.4mm |
Width: 16mm |
| Hole
Spacing: 16mm |
Barrel
Length: 25mm |
|
B-1752
|
DHS BARREL PLATES WITH DCP &
ROUND HOLES - 130°, 135°, 140°,
145° & 150° |
With DCP dynamic compression holes and slot for tension device.
Fixation with 4.5mm cortical screws.
For pertrochanteric and intertrochanteric fractures. |
| Thickness:
5.8mm |
Width: 19mm |
| Hole
Spacing: 16mm |
Outer Barrel
Dia: 12.6mm |
| Barrel
Length: 38mm |
Short Barrel
Length: 25mm |
|
|
B-1753
|
95º DCS PLATES DCP HOLES
|
With DCP dynamic compression holes and slot for tension device.
Fixation with 4.5mm cortical screws.
For condylar fractures, avoids further damage to the bone. |
| Thickness:
5.4mm |
Width: 16mm |
| Hole
Spacing: 16mm |
Barrel
Length: 25mm |
|
B-1754 to B-1761
|
Cat. No.
B-1754
B-1755
B-1756
B-1757
|
No. Holes
3 Holes
3 Holes
3 Holes
3 Holes
|
Blade Sz.
45mm
50mm
55mm
60mm
|
|
|
Cat. No.
B-1758
B-1759
B-1760
B-1761
|
No. Holes
4 Holes
4 Holes
4 Holes
4 Holes
|
Blade Sz.
45mm
50mm
55mm
60mm
|
|
|
|
B-1762
|
ANGLED BLADE PLATES FOR INTERTROCHANTERIC FEMORAL OSTEOTOMIES IN
ADULTS - 90° DCP HOLES |
|
With DCP dynamic compression holes and slot for tension device.
Fixation with 4.5mm cortical screws. The hole in the bend enables
fixation of the calcar femors with a long cortical screw. Blade
Length Measured on the inside. |
| Thickness:
5.6mm |
Width: 16mm |
| U-Profile
Blade: 6.5x16mm |
Displacement
T |
|
B-1763
|
ANGLED BLADE PLATES FOR
INTERTROCHANTERIC FEMORAL
OSTEOTOMIES IN ADULTS - 120° DCP HOLES
|
|
With DCP dynamic compression holes and slot for tension device.
Fixation with 4.5mm cortical screws. For repositioning osteotomies
in the treatment of femoral neck pseudarthroses and fracture. |
| Thickness:
5.6mm |
Width: 16mm |
| Hole
Spacing: 16mm |
U-Profile
Blade: 6.5x16mm |
|
|
B-1764
JEWETT NAIL PLATES - 135º |
B-1765
MACLAUGHLIN PLATES |
|
B-1766
|
COBRA HEAD PLATE - 4.5 MM
|
|
Shaft with DCP dynamic compression holes and slot for tension
device. For arthrodesis of the hip. In the two shaft holes next to
the head, two 4.5mm cortical screws, length 68mm, are normally used. |
| Thickness:
6mm |
Width: 16mm |
| Hole
Spacing: 16mm |
|
|
B-1767
|
HOOK PLATE 4.5MM with DCP 6
HOLES
|
Fixation with 4.5mm Cortical Screws.
Shaft with DCP dynamic compression holes and
slot for tension device. |
| Thickness:
6mm |
Width: 16mm |
|
|
B-1768
STEFFEE PLATES - 135º |
B-1769
H-PLATE FOR CERVICAL SPINE |
|
